Fence, Gate & Door Hardware
Steel Source Australia supplies the complete ELTRAK® sliding door system, ELGATE® fence and gate fitting range, VATER hardware and accessories, gate automation components, and sliding gate / bottom roller / cantilever hardware. Enquiry-based supply, Australia-wide delivery.
137+ SKUs — 5 product families
The ELTRAK® range covers everything needed for sliding shed and industrial doors — heavy-duty track, carriages, wall brackets, door framing, floor guides, lock stops, handles, rollers, round-corner bi-fold fittings and accessories. Suitable for residential, commercial, agricultural and industrial applications.
| SKU Code | Description | |
|---|---|---|
| ELT-TRK-6M | ELTRAK® sliding door track — 6.0m length | |
| ELT-TRK-9M | ELTRAK® sliding door track — 9.0m length | |
| ELT-TRK-12M | ELTRAK® sliding door track — 12.0m length | |
| ELT-CAR-STD | ELTRAK® standard carriage assembly | |
| ELT-CAR-HD | ELTRAK® heavy-duty carriage assembly | |
| ELT-BRK-WM | ELTRAK® wall mounting bracket | |
| ELT-BRK-END | ELTRAK® end stop bracket | |
| ELT-BRK-STAY | ELTRAK® stay bracket | |
| ELT-FRM-BOT | ELTRAK® bottom door framing channel | |
| ELT-FRM-SIDE | ELTRAK® side door framing channel | |
| ELT-GDE-PAD | ELTRAK® floor guide — pad type | |
| ELT-GDE-PIPE | ELTRAK® floor guide — pipe type | |
| ELT-LCK-STOP | ELTRAK® lock stop | |
| ELT-HDL-PULL | ELTRAK® pull handle | |
| ELT-HDL-FLUSH | ELTRAK® flush pull handle | |
| ELT-ROL-STD | ELTRAK® standard roller | |
| ELT-ROL-HD | ELTRAK® heavy-duty roller | |
| ELT-RDT-6M | ELTRAK® roller door track — 6.0m | |
| ELT-RC-KIT | ELTRAK® round corner fitting kit | |
| ELT-BF-KIT | ELTRAK® bi-fold fitting kit | |
| ELT-ACC-BOLT | ELTRAK® track joining bolt set | |
| ELT-ACC-CAP | ELTRAK® track end cap |
Technical Reference
Gate Hardware Standards
Gate hardware selection depends on gate weight, frequency of use, wind loading and corrosion environment. The following standards and specifications apply to gate hardware used in Australian fencing and access control applications.
AS 1418.1
Cranes, Hoists and Winches — General Requirements
Referenced for heavy-duty gate hinges and pivots rated for high-cycle applications. Specifies load ratings, safety factors and test methods for mechanical lifting and pivoting hardware.
AS/NZS 4600:2018
Cold-Formed Steel Structures
Governs the structural design of cold-formed steel gate frames and posts. Gate hardware must be compatible with the structural capacity of the gate frame and post system.
AS 1170.2:2021
Wind Actions
Gate hardware must be rated to resist wind loads on the gate leaf. Large gates in high wind regions (C and D) require heavy-duty hinges, drop bolts and latches rated for the design wind pressure.
AS/NZS 2312.2:2014
Atmospheric Corrosivity Classification
Determines the appropriate hardware finish for the project environment. Galvanised hardware for C1–C3 environments; stainless steel or hot-dip galvanised for C4 marine environments within 1 km of surf.
AS 1085.18
Coach Screws & Lag Bolts
Specifies dimensions and mechanical properties for coach screws used to fix gate hardware to timber posts. Minimum Class 3 coating for external applications; Class 4 or stainless for coastal environments.
AS/NZS 4687:2007
Temporary Fencing & Hoardings
Specifies requirements for temporary fencing hardware including panel couplers, bracing feet and gate fittings. Relevant for temporary site access gates and hoarding systems.
Can't Find What You Need?
The ELTRAK®, ELGATE® and VATER ranges are extensive. If you don't see the specific fitting, size or finish you need, contact our team — we can source items from the full Vater Corporation catalogue.